TaylorMade M6 D-Type Driver

Speed Injected Twistface

SKU: WOTM108

$449.00
RRP $749.00
SAVE $300.00 (40%)

  • SPEED INJECTED™
  • TWIST FACE™
  • AERODYNAMIC CARBON SOLE DESIGN WITH "INERTIA GENERATOR"
  • DRAW-BASED DESIGN

Learn about our high-tec authentic club fitting. Save more in-store with trades.


SPEED INJECTED, MAXIMUM FORGIVENESS WITH A DRAW

 

SPEED INJECTED™

  • Every head is individually speed tested and injected with tuning resin to optimize COR across the entire face
  • The Speed Injection process is designed to maximize ball speed and distance in the M6 driver, achieving performance at or near the legal limit

TWIST FACE™

  • Revolutionary new face curvature with a corrective face angle on off-centre hits, engineered to reduce side spin and deliver straighter shots
  • Twist Face provides more loft in the high toe and less loft in the low-heel to produce more consistent spin where golfers commonly mis-hit

AERODYNAMIC CARBON SOLE DESIGN WITH "INERTIA GENERATOR"

  • Sleek, aerodynamic shaping designed to provide increased clubhead speed for more distance
  • Inertia Generator stores 46g of weight low and back for maximum forgiveness
  • 54% more carbon than M4 allows for more weight to be housed within the "Inertia Generator"

HAMMERHEAD 2.0

  • The new, more flexible Hammerhead slot works in conjunction with Speed Injected Twist Face to produce a larger sweet spot and preserve ball speed on off-centre strikes

DRAW-BIASED DESIGN

  • The two-tone crown cosmetics have been altered to make the face angle appear more open, resulting in a more closed face at impact

 

 

 

"The M6 D-Type driver delivers the incredible performance of the M6 driver in a more draw-biased and easy-to-launch package. This driver is engineered to help golfers avoid the right side of the golf course and hit it farther off the tee than they ever have before" Tomo Bystedt | Senior Director Product Creation

 

Speed Injected Twist Face – a new Twist on Twist Face™ 

In 2018, TaylorMade engineers developed a new path to performance with Twist Face technology. To counteract the high-toe miss (a hook), the driver face was modified open (loft increased & face opened) on the high-toe to help straighten ball flight. Similarly, to counteract the low-heel miss (a slice) the driver face was modified closed to de-loft and close the face in the low heel area. 

In 2019, TaylorMade has taken Twist Face to the next level of performance with the introduction of Injected Twist Face technology, exposing the false narrative that speed limits have been reached in a metalwood. 

There are four key features to the design of Speed Injected Twist Face that allow TaylorMade to maximize ballspeed, working in unison to allow every M5 & M6 driver to be precision-tuned with a new, rigorous process to maximize speed to the allowable limit. 

  1. Ultra-thin Titanium face with redesigned Inverted Cone Technology (ICT) 
  1. Reengineered, more-flexible Hammerhead 2.0 slot  
  1. Internal support foam with variable amounts of injected resin 
  1. A proprietary algorithm to tune each head 

Every M5 & M6 driver head is inspected, measured, and tuned for maximum speed and to ensure conformity; a process truly unmatched in the golf industry. Whereas current drivers have a level of variation from one to the next, TaylorMade’s new engineering and development processes effectively deliver a level of precision that ensures every golfer gets a hot & fast driver head.  

The drivers have been designed with a thinner, more flexible face, in fact, initially designed above the legal limit before going through the tuning process, a process in which resin is injected to ensure maximum speed for each head. The injection process utilizes two new tuning ports on the face of the driver (both M5 & M6 models) and a proprietary algorithm to ensure the appropriate amount of resin is used, systematically dialing in the speed for each driver face.  

A significant benefit of the thinner, faster face design is that it provides the M5 and M6 drivers with faster off-center COR, effectively increasing forgiveness. The new face design is optimized with up to a 20% reduction in thickness that results in a 66% larger sweetspot in the M5 drivers over the M3 and more than 100% larger than the original M1 in 2015. 

 

Carbon Composite Crown & Sole 

TaylorMade’s composite technology has been in development for more than fifteen years. In the M5 & M6 drivers and fairways, TaylorMade ushers in the 4th consecutive generation of its carbon composite technology. TaylorMade engineers were able to incorporate composite panels that continue to unlock performance with a more efficient mass distribution compared to a traditional metalwood construction. 

The use of composite crown and sole panels save weight from the traditional construction of drivers and fairways. This increased discretionary weight is used to create an optimized center of gravity to deliver a hotter trajectory with increased forgiveness. The 2019 M5 & M6 have also increased the overall composite crown footprint by 10%.  

 

Aerodynamic Carbon Sole Design with ‘Inertia Generator’ 

Featuring the same 6-layer carbon composite crown as the M5 driver, the 2019 M6 drivers adds a complete carbon fiber sole, allowing for significantly more discretionary weight to be used elsewhere in the clubhead – as much as 54% more than its predecessor, the M4. With the weight savings, engineers were able to create a sleek, aerodynamic shape inclusive of the new ‘inertia generator.’ The inertia generator houses the additional discretionary weight extremely low and back for maximum forgiveness while lowering the CG compared to previous models. 

 

 

SHAFT

mEns: PROJECT X EVENFLOW MAX CARRY 45

WOMEN'S: TAYLORMADE TUNED PERFORMANCE 45 (L)

 

GRIP

MEN'S: TM LAMKIN DUAL FEEL '19 0.620 RND 47g (ATMOS BLACK)

MEN'S: TM LAMKIN DUAL FEEL '19 0.600 RND 47g (ATMOS ORANGE)

WOMEN'S: TM LAMKIN DUAL FEEL COMFORT 0.580 43g

 

(WOTM108)

 CLUB

LOFT

HAND

LIE

VOLUME

LENGTH

SW

M6 460 DRIVER

9.0º

RH/LH

56º-60º

460cc

45.75"

D3

M6 460 DRIVER

10.5º

RH/LH

56º-60º

460cc

45.75"

D3

M6 460 DRIVER

12º

RH

56º-60º

460cc

45.75"

D3

SKU WOTM108
Model # M26875
Barcode # 1200102057318
Brand TaylorMade Golf
Year/Model 2019

Be The First To Review This Product!

Help other Golf World users shop smarter by writing reviews for products you have purchased.

Write a product review


More From This Category


Callaway MAVRIK Driver
WOCY364-365

Callaway MAVRIK Driver

$569.00 $829.00

Slotline Adjustable Driver
WOBG582

Slotline Adjustable Driver

$419.00 $449.99

Srixon ZX5 Driver
WOTC247

Srixon ZX5 Driver

$535.00 $669.95


Suggested Products


9 Cane-It Tees
TEBG139_0570833122

9 Cane-It Tees

$1.00 $1.99

50% OFF
Prosimmon Intel Golf Glove - 3 Glove Pack
Top Seller
Brosnan 3 Inch Wood Tees 10 Pack - White
TEBG152_0571191373

Brosnan 3 Inch Wood Tees 10 Pack - White

$2.20

Slotline Tour Soft Golf Balls - 3 Dozen White
BABG160_3DOZ

Slotline Tour Soft Golf Balls - 3 Dozen White

$54.00 $104.97

49% OFF Top Seller