TaylorMade Milled Grind 2 Chrome Wedge - Standard Bounce [Hand: Mens Right] [Loft:60 Deg] [Bounce:10 Deg]

2019 - MG2

SKU: WETM101_0571372664

$249.99

  • Raw Face Design
  • ZTP RAW Groove Design
  • Thick-Thin Head Design
  • Milled Grind

Hand
Loft
Colour
Bounce

You Might Also want to add


Untitled Document Untitled Document
FREE DELIVERY ON ALL ORDERS OVER $25 Untitled Document Untitled Document

RAW SPIN. RAW BEAUTY.

 

Raw Face Design - Omitting plating from the face and grooves allows for more precise geometry optimizing spin and feel

ZTP RAW Groove Design - Sharper, Deeper, Narrower Groove, sharper radii engineered for more greenside spin

Thick-Thin Head Design - Mass placement for enhanced feel while optimizing CG location for precise flight

Laser Etched Pattern - Laser etching between the grooves on the raw face creates a rougher surface for more greenside spin

Milled Grind - Milled Grind wedges ensure precision where it matters most. The milling process maximizes consistency, maintaining tolerance levels difficult for a human to repeat

TPU Insert - The TPU insert in the back cavity is designed to provide vibration dampening to create a solid, positive feel at impact
 

TWO BOUNCE TYPES

  1. Low Bounce = 8 Degrees Bounce - Features a narrow crescent shape low bounce allowing maximum green side versatility
  2. Standard Bounce = 9-12 Degrees Bounce - An all-purpose grind and designed for players that like to rotate the club face open and shut

 

SB = STANDARD BOUNCE 

(9 to 12 Degrees)

AN ALL PURPOSE GRIND AND DESIGNED FOR PLAYERS

THAT LIKE TO ROTATE THE CLUB FACE OPEN AND SHUT

LB = LOW BOUNCE

(8 Degrees)

FEATURES A NARROW, CRESCENT SHAPE AND LOW BOUNCE,

ALLOWING MAXIMUM GREEN SIDE VERSATILITY

Neutral or steep attack angle

SWING TYPE

Neutral / Shallow attack angle

Enhanced for full and pitch shots

SHOT TYPE

Enhanced for open face angle

Medium / Soft

CONDITION TYPE

Medium / Hard

Hit a medium to large divot

CHOOSE IF YOU:

Hit shallow divots on full shots


"Our Tour Players have long benefited from the performance raw wedges offer and it’s great to now be able to offer these performance gains to golfers of all levels. We’re confident they will enjoy the look, feel and performance that a raw face has to offer." — Bill Price, Senior Director of Product Creation, Putters & Wedges

 

 

More From Taylormade


Raw Face Design

With the new MG2 wedges, engineers have utilized the combination of face and groove design to create the ultimate spin for ultimate performance. Raw Face design produces a more precise geometry designed to optimize spin and feel. ZTP Raw Grooves offer sharper, deeper and narrower grooves and a sharper radius, which further combined with a rougher surface from the laser etching between the grooves, enable the golfer to create more friction between the clubface and the ball generating more greenside spin.

Compared with plated grooves, the raw face design increase in friction reduces the ability for the golf ball to potentially skid up the clubface before it grips the face leading to a more consistent ball flight enabling golfers to get closer to the hole.

Unique to the MG2, each raw wedge head will feature an air-tight 3M adhesive sticker which has been specially designed for the wedge and is applied on the face to prevent rusting before purchase/use. When the golfer removes the adhesive sticker, the face will immediately begin oxidizing, which in turn, begins the rusting process.


Creating the Best Feel: Thick-Thin Head Design

To create optimal feel, TaylorMade’s engineers have altered the geometry of the clubhead to create a Thick-Thin Head Design using a design optimization tool previously only used in the metalwood and irons design processes. This tool illustrated that having a thicker backing combined with a thin outer section optimized frequency and duration for the desired sound and
feel.

The different material thickness in MG2 is highlighted by the movement of weight placement in the clubhead. The face thickness of the head has increased from 5.1mm in MG1 to 6.5mm in MG2. To enable a thicker clubhead without adding weight, engineers were able to move weight by creating a TPU Insert in the back cavity. The TPU Insert is designed to provide vibration dampening to create a solid, positive feel at impact.


Creating the Best Precision: CNC Milling

The implementation of machining technology, first introduced in Milled Grind Wedges but more recently in the new P·7TW irons, enables each leading edge and sole grind to be individually CNC milled for unparalleled accuracy and consistency from club to club and grind to grind. By producing wedges not by hand but through CNC milling machines, the CNC tolerances of a milled sole far exceed what a human can do in a repeatable fashion, thus enabling each wedge to be replicated so there is no variance.

Likewise, the sole geometry, consisting of contour, angle and surface area must be designed and maintained to interact properly with the turf in the desired manner. Different ground and sand conditions also require variations in sole geometries to facilitate play depending on player type. A low effective bounce (LB) grind provides the least amount of ground resistance and a standard grind (SB) has a median ground resistance.


We have one of the best wedge line-ups on the market but realized that there was still one golfer out there that wasn’t catered for, with Big Foot we now have a game improvement wedge that’s easier to play regardless of course conditions, especially for those who struggle out of bunkers. The Hi-Toe Family of wedges now cover every aspect of the game; versatility, playability
and game improvement.
Bill Price, Senior Director of Product Creation, Putters & Wedges

 

 

 

 

 

(WETM101)


SHAFT
Steel - True Temper Dynamic Gold S200

GRIP
TM Lamkin Crossline Soft Cord 0.580

SPECS

 

CLUB

LOFT

LENGTH

BOUNCE

LIE

HAND

SWINGWEIGHT

MATERIAL

FINISH

GROOVE

Standard Bounce

48°

35.75”

64°

RH

D3

8620 Carbon Steel

CHROME

ZTP-RAW

Standard Bounce

50°

35.50”

64°

RH/LH

D3

8620 Carbon Steel

CHROME/BLACK

ZTP-RAW

Standard Bounce

52°

35.50”

64°

RH/LH

D3

8620 Carbon Steel

CHROME/BLACK

ZTP-RAW

Standard Bounce

54°

35.25”

11°

64°

RH/LH

D5

8620 Carbon Steel

CHROME/BLACK

ZTP-RAW

Standard Bounce

56°

35.25”

12°

64°

RH/LH

D5

8620 Carbon Steel

CHROME/BLACK

ZTP-RAW

Standard Bounce

58°

35”

11°

64°

RH

D5

8620 Carbon Steel

CHROME/BLACK

ZTP-RAW

Standard Bounce

60°

35”

10°

64°

RH/LH

D5

8620 Carbon Steel

CHROME/BLACK

ZTP-RAW

Low Bounce

54°

35.25”

64°

RH

D5

8620 Carbon Steel

CHROME/BLACK

ZTP-RAW

Low Bounce

56°

35.25”

64°

RH/LH

D5

8620 Carbon Steel

CHROME/BLACK

ZTP-RAW

Low Bounce

58°

35”

64°

RH

D5

8620 Carbon Steel

CHROME/BLACK

ZTP-RAW

Low Bounce

60°

35”

64°

RH/LH

D5

8620 Carbon Steel

CHROME/BLACK

ZTP-RAW

SKU WETM101
Model # N69032
Barcode # 1200102142915
Brand Taylormade Golf

Be The First To Review This Product!

Help other Golf World users shop smarter by writing reviews for products you have purchased.

Write a product review


More From This Category



Others Also Bought


Garmin Approach G10 Golf GPS
EGGA102_0571190086

Garmin Approach G10 Golf GPS

$157.00 $199.99

22% OFF TOP SELLER
Callaway Big Bertha OS Irons
IRCY339

Callaway Big Bertha OS Irons

$1,104.00 $1,139.99