MGI Phone Holder

MGI Phone Holder

The MGI Phone holder conveniently locks on your MGI Buggy Series top box position and holds your device securely whilst you're out playing your best game.

The phone holder can accommodate devices with a maximum width of 10cm.

Compatible with both ZIP and Ai Series electric buggy. Not suitable for Quad Series electric buggy.

The Phone Holder can be mounted on the left or right-hand side of the buggy, but MGI recommends mounting it on the right-hand side.

Ai Model Instructions

1. Unscrew lock nut from back of phone holder 
2. Fit the lock nut over the ball joint 
3. Attach the ball joint to the back of the phone holder 
4. Screw in the lock nut over the ball joint until tight 
5. Attach the arm to the right side of the accessory port station and screw in bold to tighten 
6. Store the accessory port protective cap where safe 

ZIP Model Instructions

1.        Unscrew lock nut from back of phone holder
2.        Fit the lock nut over the ball joint 
3.        Attach the ball joint to the back of the phone holder 
4.        Screw in the lock nut over the ball joint until tight 
5.        Attach the arm to the right side of the accessory port station and screw in bold to tighten 
6.        Store the accessory port protective cap where safe