Grindworks MB-101A Irons [4-PW]

The MB-101A forged iron was developed together with Mr. Reed based on his needs as a top pro.   Mr. Reed approached grindworks on August, 2018 about creating iron that would allow him to knock down shots from any distance without worrying about ballooning or loss of direction.  Using soft S20C forging to enhance feel and spin, we created a stepped design for the Iron which places a focus on stability and control by raising the center of gravity height.  This allows Mr. Reed to attack the pin with a more penetrating shot and heavier spin resulting in shots closer the pin.

Mr. Reed put a prototype of the MB-101A into play in December 2019 at the Hero World Challenge and went on to win the World Golf Championships in Mexico in February with the irons.  So far in the short 2020 season, Mr. Reed already has 1 victory and 6 top 10 finishes on the PGA Tour using the PR-101A and is currently ranked 8th in the world.

The MB-101A has a smallish head with less offset that frames the ball well at address. The sole is narrower and the leading edge is straighter but with relief which helps interact with the turf more cleanly at impact by minimizing fat shots/digging.  The stepped back muscle helps create a thinner top line which is more eye pleasing for the better player.  The stepped design also helps with functionality and feel, the thicker area is larger towards the toe which prevents the head from over rotating closed thus minimizing pulls and hooks.  The step groove in the middle makes the sweet spot slightly thinner, increasing spring effect and the widening the sweet spot of the face for more ball speeds and more forgiveness.

Premium S20C soft carbon steel forging and a finish in half satin NiCr plating results in a more pure feel and more bite on the ball. A mix of clean and modern aesthetics will appeal to a wide variety of golfers looking for an iron that focuses on feel, stability and shot making.